Polaris 2005 Edge Touring Скачать руководство пользователя страница 27

Страница: 27 / 153

SAFETY

Safety Decals and Locations

Operation Warning

Operation warning decals are present on the console of all Polaris

snowmobiles, in both French and English.

Operation Warning Decal Text:

To avoid serious injury or death, read and understand all warnings

and the Owner’s Manual before operation. If the manual is missing,

contact a Polaris dealer for a replacement.

This vehicle is capable of high speeds. Buried objects or uneven ter-

rain can cause loss of control. Reduce speed and use extreme cau-

tion when operating in unfamiliar terrain.

Excessive speed, especially at night or with limited visibility, can re-

sult in insufficient time for you to react to terrain changes, to avoid

unexpected obstacles, or to stop safely.

Never consume alcohol or drugs before or while operating this ve-

hicle.

In an emergency, push down the Auxiliary Shut-Off Switch, located

on the top of the throttle control assembly, to stop the engine. Then

pull the brake lever to stop.

Always wear an approved helmet, eye protection, and adequate

clothing while operating this vehicle.

This vehicle is designed for adult use only. Check local laws for age

requirements.

When operating with a passenger (on approved models only) reduce

speed and allow extra space for steering and stopping. A passenger

reduces your ability to control the vehicle.

When operating on hard-packed snow, ice, or when crossing roads,

steering and braking ability are greatly reduced. Reduce speed and

allow extra space to turn or stop.

To maintain vehicle control on ice or hard-packed surfaces, you

should have a proper balance of ski carbides to track studs. See

Owner’s Manual for proper use of traction products.

Repeated stops from high speed may cause fading or sudden loss of

braking ability.

Parking brake may relax when used for long periods. Do not leave

brake engaged for more than five minutes.

Before starting the engine, check throttle, brake, and steering for

proper operation. Make sure hood is latched. Be seated and in posi-

tion to control the vehicle.

Oil injection system: Use unmixed fuel only. Check oil level when refueling.

Содержание 2005 Edge Touring


























































































































































Результаты поиска

Содержание 2005 Edge Touring

Отзывы:

Похожие инструкции для 2005 Edge Touring

Бренды по названию

Популярные бренды

Polaris 2005 Edge Touring, Руководство пользователя

Результаты поиска

Содержание 2005 Edge Touring

Отзывы:

Похожие инструкции для 2005 Edge Touring

Бренды по названию

Популярные бренды