Polar Refrigeration DN492-A, Инструкция по эксплуатации

Страница: 5 / 12

Telephone Helpline: 1300 225 960 (Australia)
5
How to stop a cycle
If you have selected a chill operation, press and release the key. If you have selected a freeze
operation, press and release the key. The unit will then switch off.
When a Cycle is Running
Display Temperatures
The upper display (in red) shows the temperature of the inside of the cabinet. The bottom display (in
yellow) shows the temperature of the insert probe (ip1).
Probes ip2 & ip3 are not included, if displayed press the down key until ip1 is displayed.
Once the cycle has finished, the unit will beep to indicate the food has reached its desired temperature.
Manual Defrost
Assure that no cycle is active and that the hold mode function is not running.

Hold and press the UP key for few seconds.
Note: The defrost will not be done if the temperature detected by the evaporator probe is higher than
the stop defrost temperature parameter.
Locking the Keyboard

To lock & unlock the keyboard, hold down both up and down keys together
Resetting Date and Time
1. To reset the clock data, press and hold button for 5 seconds. This will display the
date and time parameters.
2. Press the key. The value will start to flash.
3. Edit the value using the and buttons.
4. Press to select the new value and move onto the next value.