background image

1

Safety Tips

Position on a flat, stable surface.

A service agent/qualified technician should carry out installation and any 
repairs if required. Do not remove any components or service panels on 
this product.

Consult  Local  and  National Standards to comply with the following:

• Health and Safety at Work Legislation
• BS EN Codes of Practice
• Fire Precautions 
• IEE Wiring Regulations
• Building Regulations

DO NOT use jet/pressure washers to clean the appliance.

DO NOT use the appliance outside.

DO NOT use this appliance to store medical supplies.

DO NOT use electrical appliances inside the appliance 
(e.g. heaters, ice-cream makers etc.)

DO NOT stand or support yourself on the base, drawers or doors.

DO NOT allow oil or fat to come into contact with the plastic 
components or door seal. Clean immediately if contact occurs.

Bottles that contain a high percentage of alcohol must be sealed and 
placed vertically in the refrigerator.

Always carry, store and handle the appliance in a vertical position and 
move by holding the base of the appliance.

Always switch off and disconnect the power supply to the unit before 
cleaning.

Keep all packaging away from children. Dispose of the packaging in 
accordance with the regulations of local authorities.

If the power cord is damaged, it must be replaced by a POLAR agent or 
a recommended qualified technician in order to avoid a hazard.

Product Description

DL893-A

 - 600 litre Single Door Stainless Steel Refrigerator

DL894-A

 - 600 litre Single Door Stainless Steel Freezer

DL895-A

 - 1200 litre Double Door Stainless Steel Refrigerator

DL896-A

 - 1200 litre Double Door Stainless Steel Freezer

DL897-A

 - 1200 litre Double Door White Freezer

DL898-A - 

1200 litre Double Door White Refrigerator

DL899-A

 - 600 litre Single Door White Refrigerator

CK480-A

 - 600 litre Single Door White Freezer

Introduction

Please take a few moments to carefully read through this manual. Correct 
maintenance and operation of this machine will provide the best possible 
performance from your POLAR product.

Pack Contents

The following is included:

POLAR prides itself on quality and service, ensuring that at the time of 
packaging the contents are supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your POLAR 
dealer immediately.

Installation

1.

Remove the appliance from the packaging. Make sure that all protective 
plastic film and coatings are thoroughly removed from all surfaces. 

2.

Maintain a distance of 20cm (7 inches) between the unit and walls or 
other objects for ventilation. Increase this distance if the obstacle is a 
heat source. 

3.

Set the brakes on the castors to keep the appliance in position
OR
Level the appliance by adjusting the screw feet.

Removing the Compressor Safety Band 

The compressor is located on the top of the appliance, and sits on rubber 
washers. Under normal operating conditions the compressor is allowed to 
vibrate. 
To avoid damage through excessive motion during transit, a stainless steel 
safety band is placed over the compressor and screwed into the top of the 
appliance.
This safety band and the two screws fixing it to the appliance 

must be 

removed

 before the appliance is turned on.

Lock/Unlock the Doors

A lock is fitted to the doors to ensure foodstuffs are kept secure within your 
POLAR appliance.
Use the keys provided to lock/unlock the doors.

Note: If the appliance has not been stored or moved in an 
upright position, let it stand upright for approximately 12 
hours before operation. If in doubt allow the appliance to 
stand.

Note: Before using the appliance for the first time, clean the 
shelves and interior with soapy water.

POLAR Refrigerator or Freezer

Keys  x  2

Shelf guides x 6 (Single)/ 
x 12 (Double)

Shelves  x  3  (Single)/ 
x 6 (Double)

Instruction manual

Compressor 

Safety Band

Screws

Compressor

Содержание DL893-A









Отзывы: