Polar Refrigeration CB507, Инструкция по эксплуатации

Страница: 6 / 48

5
UK
Electrical Wiring
POLAR appliances are supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as
standard.
The plug is to be connected to a suitable mains socket.
POLAR appliances are wired as follows:
•
Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
All POLAR appliances must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
Technical Specifications
Fault Probable Cause Action
The appliance turns
on, but the
temperature is too
high/low
Appliance is overloaded Reduce the amount of food stored in the appliance
The appliance is
leaking water
The appliance is not properly
levelled
Adjust the screw feet to level the appliance (if applicable)
The discharge outlet is blocked Clear the discharge outlet
Movement of water to the drain
is obstructed
Clear the floor of the appliance (if applicable)
The water container is
damaged
Call POLAR agent or qualified Technician
The appliance is
unusually loud
The frame has become loose Check and tighten all nuts and screws
The appliance has not been
installed in a level or stable
position
Check installation position and change if necessary
Model Voltage Power Current
Temperature
Range
Capacity
(litres)
Refrigerant
Dimensions
H x W x D (mm)
Weight
(kg)
G619
G211
230V
50Hz
180W 1.2A 2°C to 12°C 70 R600a 40g 885 x 428 x 386 32.5
CB507
DP288
230V
50Hz
180W 1.2A 2°C to 12°C 86 R600a 40g 980 x 428 x 429 36,5
CB509
DP289
230V
50Hz
250W 1.5A 2°C to 12°C 235 R600a 100g 1695 x 515 x 485 76.4
CG582 230V
50Hz
210W 1.35A 2°C to 12°C 100 R600a 50g 1100 x 565 x 565 50