![Polar Electro GE819 Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/polar-electro/ge819/ge819_instruction-manual_1571555005.webp)
5
EN
Cleaning, Care & Maintenance
• Switch off and disconnect from the power supply before cleaning.
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Clean the door seal with water only.
• Always wipe dry after cleaning.
• If left unused for any length of time, store the appliance with the door ajar.
Condensation will form in refrigeration with frequent opening of the doors and on hot humid
days, please ensure condensation is allowed to drain properly or is wiped dry.
Auto Defrost
Periodically the appliance will run an automatic defrost cycle to prevent any ice build-up.
Note: In case of Ice built-up (3-5mm thick), set the thermostat to “OFF” and leave the door open. Then
manually defrost the appliance. Never use sharp objects for scraping.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
Probable Cause
Solution
The appliance is not
working
The unit is not switched on
Check the unit is plugged in correctly and
switched on
Plug or lead is damaged
Replace plug or lead
Fuse in the plug has blown
Replace the fuse
Mains power supply fault
Check mains power supply
Unit cabinet is not
cold enough
Temperature set incorrectly
Check temperature and reset if necessary
External environment may require
colder temperature
Check temperature and reset if necessary
Door is opened too often
Only open when necessary
Door seal is worn
Replace the door seal
Door will not close
properly
Appliance is not level
Check installation position and change if
necessary
Door has been reversed and not
properly fitted
See “Reversing the Door”
Shelves are out of position
Check shelves are properly inserted
Door seal is dirty
Wipe clean with a damp cloth
The appliance is
noisy
Loose nut/screw
Check and tighten all nuts and screws
The appliance has not been installed
in a level or stable position
Check installation position and change if
necessary
GE819_ML_A5_v1_20220421.indb 5
GE819_ML_A5_v1_20220421.indb 5
2022/4/21 13:41
2022/4/21 13:41