![background image](http://html.mh-extra.com/html/polar-electro/cycling-computer/cycling-computer_user-manual_1571203004.webp)
Care and Maintenance
Keep the speed sensor clean. Clean it with a
mild soap and water solution and rinse off with
clean water. Dry it carefully with a soft towel.
Never use alcohol or any abrasive material such
as steel wool or cleaning chemicals. Do not
immerse the speed sensor in water.
Your safety is important to us. Make sure that
you can turn your handlebars normally and that
the cable wires for brakes or gears do not catch
the bike mount or the sensor. Also, make sure
that the sensor does not disturb pedaling or
using the brakes or gears. While riding your
bike, keep your eyes on the road to prevent
possible accidents and injury. Avoid hard hits as
these may damage the sensor.
Speed Sensor Battery
Contact your authorized Polar Service Center for
a replacement of speed sensor. Polar recycles
used sensors. For more information on local
after sales services, consult the Polar Customer
Service Card.
Frequently Asked Questions
What should I do if...
...the speed reading is 0.0 or there is no speed
reading while cycling?
•
Start searching for the data again by
pressing and holding the LIGHT button and
selecting
Seek sensor
.
•
Make sure the position and distance of the
sensor to the magnet are appropriate.
•
Check that you have activated the speed
function in the cycling computer. For further
information, see Speed Sensor Teaching.
E N G L I S H
4