background image

The  “3D Sensor”  better  know  as  an  Accelerometer  is a  more accurate and reliable recording mechanism 

utilizing a multiple  vibrating  filament as  opposed to  an old  fashion  pendulum strike.  The  “3D  Sensor” is 

completely silent and does not have a “Clicking Noise”.

 

The  “3D Sensor”  allows  for  360  degrees of  motion  giving  the  unit  freedom to  be  positioned  anywhere 

accurately recording for all body shapes and users, making the unit nearly 100% accurate.

Where To Position The Pedometer:

The  unit can be position  anywhere and  at any angle  on the body (eg. waist, back/front pocket, shoe, purse, 

arm, etc.) on the body.

However the ideal position is to clip the unit to your belt or the top of your waistline as near as possible to the 

mid-line of thigh. (See Example below)

Step Count:

Press  the  MODE button until  STEP appears  on the  right.   Press and  hold the  RESET button until a zero 

appears; you are now ready to begin walking.  

(Kinetic Fit Works™ pedometers feature a delayed  reset button. Reset Button should be pressed gently with 

the pad of finger and held for approximately  4 seconds to clear. The display will flash during the four second 

interval to signal that resetting is underway).

 If your pedometer is not counting steps, the

 

Step Filter

 

may be on.  Please refer to instruction below

.

Setting the Step Filter:

(Kinetic Fit Works

  pedometers  feature a delayed  reset  button.   Reset Button should be pressed gently with 

the pad of finger and held for approximately 4 seconds to clear.  The display will flash during the three second 

interval to signal that resetting is underway).

Kinetic Fit Works™ pedometers incorporate a user-adjustable step filter.  A step filter counts a specified number 

of steps before actually incorporating them into the total step count.  To set the step filter, follow the steps below:

1. Push the MODE button until you are in step mode.

2. Hold down the SET button for three seconds to switch between ON/OFF.   ON = 4 Steps  OFF = 0 steps

2 Function Digital Pedometer with 3D Sensor

Kinetic Fit Works / NE-2

Page 1

RESET

BUTTON

MODE

BUTTON

SET

BUTTON

NOTE

60°

60°

30°

30°

1981 Wiesbrook Dr
Unit D
Oswego IL 60543
P:630-340-5168
F:815-439-2414

www.kineticfitworks.com

Отзывы:

Похожие инструкции для NE-2