5
Pre-setting torque value
Increase torque value
Decrease torque value
Press
Press
3. Set target torque
Note:
The “Unit selection” is cyclic.
Track mode
Set peak / track mode
Set peak / track mode
Clear record
Peak hold mode
Set peak / track mode
Long press
Press
Press
Press
Press
for selection
4. Peak hold / track mode selection
Note:
1. Please skip this procedure and continue to
the next step.
*Note 1
*Note 1
TRACK MODE OPERATION
((((((((
))))))))
((((((( )))))))
((…((… …))…)) ((…((… …)) …))
START
*Note 1
*Note 2
(System initial)
Setting target torque
Current torque value
Current torque value
Green LED
Reach 90% of target torque
Red LED
Approached target torque
Buzzer
Buzzer
Reach 90% of target torque
Reach target torque
Apply torque
Note:
1.
1. If
appears, it means the screw-
driver is overloaded. Overload = 110% of
maximum torque. Please contact your local
dealer for recalibration.
2. When reaching the setting target torque,
the green and red LED will be on at the
same time.
