Polar Electro 520 CTH DB 2020, Инструкция

Страница: 22 / 60

Body
Body
Rubber
moulding with
sealing strip
Wooden beam
Aluminium
moulding
Rubber
moulding with
sealing strip
Wall panel 0,6 mm
hammered aluminium
Plywood 3 mm
Insulation
Roof panel
0,6 mm smooth
aluminium
Bostik 1590
Terostat
2759
(In some models
Wall panel 0.8 mm
smooth aluminum)
Door
The lockable outer door is stopped in the outermost
position by a doorstop. The doorstop can also function
and a door holder, holding the door in place in the open
position.
Lubricate the outer door’s hinges to prevent the door
seizing.
The body is manufactured using a ‘sandwich’ construc-
tion. Walls and gables are made of 0.6 mm aluminium
plate (some models have 0.8 mm smooth aluminum plate
on the side walls), 37 mm insulation (foam rubber) and
wallpapered plywood on the inside. The ceiling is built
up of equivalent insulation and plywood, but has 0.6 mm
aluminium plate. This is bonded together in a vacuum-
press to create a sandwich element.
The floor is made up of 5 mm plywood on the top, 44
mm insulation (foam rubber) and 5 mm plywood on the
underside. The floor is bonded in the same way as the
walls, roof and gables.
The caravan is fitted with awning mouldings on the gables,
and it is also supplied with mouldings for a tent and caravan
hoods. The left side of the caravan also has a tent moulding
that can be used e.g. for your winter tent in the summer.
At the front of the body there is a LPG box, in which
the LPG bottle and other items are stored. A foot stool is
included as standard on all models.
Windows
Ventilation
Ventilation is an effective way of combating condensa-
tion on the inside of the windows. The air humidity is
affected by the ventilation. If cold air is heated up, it is
able to absorb the free water (mist).
Condensation comes and goes depending on temperature,
air humidity, if there are more people in the caravan than
ventilation is approved for, wet clothes or shoes, and
house pets (dogs, etc.) and it can only be affected within
certain limits. The only factor we can control is the indoor
temperature. Everything else we have to put up with.
In other words, the presence of condensation between the
panes of glass does not indicate a fault in your caravan
window. However, you may have to wait some time for
the condensation to disappear.
COLD AIR
HOT
AIR
Handle
Opening the window
First turn the regulator 90˚ then set the window in the
desired position.
Ventilation position
If you want, the window can be placed in the ventilation position.
To place the window in this position, close the handle so that the
grip is secured around the narrow side of the window frame.
22