background image

SMART COACH 

RADAR

POWER OPTIONS

36

POWER OPTIONS

Standard Batteries

If powered via Alkaline C-size batteries, after the Self Test passes, the 

Smart Display will flash “

bat

” for 1 second and then the current battery 

level (either 

Lo

1

,

 2

3

 or 

4

) for another second. Typical battery life with 

Alkaline C-size batteries is 14 hours.  See table below:

The Smart Display and Smart Coach radar combo can be powered 
either using USB connection or Alkaline C-size batteries.  This makes it 

extremely portable and flexible for indoor and outdoor use.  When con

-

nected to the Smart Display, the Smart Coach radar will be powered via 
the Display and not the internal AAA batteries.

Power On - Self Test

If powered via USB or batteries, the Smart Display will flash “

888

” for 2 

seconds, after pressing the Power (red) button.  That means the Self 
Test has passed and you are ready to start capturing speeds.  If the 
Self Test fails, then an error code will be displayed.  The error code will 

include “E #”, where the # specifies the error number (example: 

E 4

).  

This error code will flash every second for 2 minutes until it powers off 

automatically.  

See Page 51 for more about Error Codes.

USB Powered

When using a USB Power Pack, the battery life will be dictated by the 
specs of the Power Pack.  

See Page 34 for more about USB Power 

Pack options.

Level

Remaining Life

Lo

 / 

Bat 

1

2

3

4

100% to 76%

25% to 5%

Less than 20 minutes

75% to 51%
50% to 26%

Содержание SD2010





























































Отзывы: