29
SMART COACH
RADAR
™
GETTING STARTED
GETTING STARTED
Set Up Instructions
1. Insert the small end of one of the 6 ft (2 meter) Type A to
Micro B cables into the Smart Display and the other end
into the 2 amp AC power supply (USB charger). Then plug
the 2 amp AC power supply into any power outlet.
2. Insert the small end of the other 6 ft (2 meter) Type A to
Micro B cable into the Smart Coach radar and the other
end into the Smart Display.
3. Press the Power (red) button on the Smart Display and
activate the Smart Coach radar, and you’re ready to start
capturing speeds.
• See next page for illustrations.
If you plan on using standard Alkaline AAA batteries or a USB Power
Pack as your power source, please refer to page 36 in this Manual.
IMPORTANT NOTE:
If the Smart Coach radar is not connected to
the Smart Display, “
no rdr
” will flash for 2 minutes until it powers off
automatically. To turn off the Smart Display, simply hold the Power (red)
button down for 1 second. Once “
Off
” is displayed, release the button
and the Smart Display is now turned off. Please note that the speed
memory stored in the Smart Display will be erased as well.
Smart Coach radar
Содержание SD2010
Страница 14: ...PRO RADAR MODULE 9 GETTING STARTED Set Up Illustrations GETTING STARTED ...
Страница 35: ...GETTING STARTED Set Up Illustrations SMART COACH RADAR GETTING STARTED 30 ...
Страница 60: ......