manualshive.com logo in svg

Pocket home PH-BP1-V, Руководство пользователя, Страница: 3 / 8

Поделиться
Скачать
Pocket home PH-BP1-V Скачать руководство пользователя страница 3

Pushing the  

Fce

 button and then the 

 button, you can choose the following functions:

1. AUTO  : thermostat works according to the preset program.
2. MANU  : used for manual setting of temperature (selection with the 

P

  button or the  

 

 

  buttons; the temperature remains constant until the next change.

3. CL:O  : current day and time setting. 
4. PROG  : programming mode.
5. PA:r 

: setting of parameters (constants).

6. OF:F  : PH-BP1-V is switched off permanently in this mode (except for the  “      “ mode ).
7. UA:dr  : learning the unique number from the central unit / learning the code in the PH-BP1-P9 receiver

FUNCTIONS

Note: If no button is pushed within 2 minutes, the transmitter resumes the basic mode.
          After long push, the            button function speeds up.

PA:r1  options for data on the display

- Push the 

Fce

 button, chose the 

PA:r

 

(parameters)

 function with the 

, confi rm with 

i

.

- PA:r1 appears on the display
- Confi rm with the 

i

 and with the 

 choose the option for displayed data in the basic 

mode:
 

t

 

current temperature display

 

C

 

current time display

- Confi rm your choice by pushing the  

i

 button again.

PA:r2  economical temperature (17°C by default)

- PA:r2 appears on the display
- Confi rm with the 

i

 button and set the economical temperature with the 

 button; confi rm 

with the 

i

 button again.

 1, Push the 

Fce

 button, chose the 

CL:O

 

(clock) 

function with the  

 button, confi rm 

 

with the  

i

 .

 2, Time appears on the display and hour indication is fl ashing; set the desired value with the 
 

 button and confi rm with the 

i

 button. Minute indication starts fl ashing; set the 

 

desired value with the 

 button and confi rm with the 

i

.button again. The day value 

 

appears (d:1 Monday to d:7 Sunday); select the current day with the 

  button and 

 

confi rm with the 

i

 button again.

TIME SETTING - CL:O FUNCTION  current time and day

Содержание PH-BP1-V









Отзывы:

Нет отзывов