POBEL DESA 0041, Инструкция по эксплуатации

Страница: 11 / 18

ENG
10
1.1. GENERAL INFORMATION
•
The package must be handled carefully. When you unpackage it, you should check that what it
contains inside is what is indicated in the Packing List section. If any component is missing or
otherwise damaged, contact the dealer immediately.
•
Please, read the instructions before installing the apparatus. The instruction manual will be an
inseparable part of the product; For this reason, keep it in good condition for future reference.
•
The modification of the components of the product transgresses the directive of use 2009/104 /
CE; and therefore: the manufacturer is not responsible for the damages that this brings as damage.
•
The product must be installed on a horizontal surface and never in places where there are vapors
of contaminating or flammable substances.
•
Please, dispose of at least the first distillation before using the equipment.
•
Conservative packaging during the warranty period.
•
Warning and Observation are indicated in you can see below:
1.2 PACKING LIST
Description Qty.
Metallic water still 1
Feed water tuve 1
Filter 1
Silicone tube 12x18 2
Manual 1
1.3 PRODUCT SPECIFICATONS
Specifications 10DESA0041 10DESA1041 10DESA0081 10DESA0120
Distillation capacity (L/H) 4 4 8 12
Cooling water (L/MIN) 1 1 1,4 1,6
Conductivity 20⁰C (µS/cm) 2 2 2 2
Wattage (W) 3000 3000 6000 7800
Voltage (V) 230 110 230 380
Intensity (A) 13 27 26 11,3 / phase
Weight (Kg) 8 12 13
Dimensions, height x width x
depth (mm) 435 x 370 x 220 635 x 370 x 260 670 x 370 x 260
Safety Thermostat, level switch
Warning: Must be strictly followed to avoid physical damage.
Note: Contains suggestions and restrictions for the product.