11
3.2 Installing the belt clip
a. At the back of the radio there are two parallel screws mounted above the battery, remove these and thread them through
the holes on the belt clip as you screw them back into the radio body.
b. Removing the Belt Clip: Unscrew counter-clockwise to remove the belt clip.
3.3 Installing the battery pack
Before attaching or removing the battery make sure your radio is turned off by turning the power/volume knob all the way
counter-clockwise.
a.
Make sure the battery is aligned in parallel with the radio body with the lower edge of the battery about 1-2cm below
the edge of the radio.
b.
Once aligned with the guide-rails, slide the battery upward until you hear a click as the battery locks in place.
