6
• TOT (Time out timer)
• DTMF function
• Reverse function
• Alarm function
• CTCSS and DCS codes research
• Setting and storing of channel names
• Busy Channel Lockout function (BCL)
• High/low power selection
• Frequency step: 2.5/5/6.25/10/12.5/25KHz
• Frequency offset (adjustable): 0-69.990MHz
• Repeater shift
• 2pin Kenwood accessory jack
• VOICE: vocal indication of the function selected
• Keypad lock
1.3 Content of the packaging
• 1 Radio
• 1 Li-Ion battery pack 1800mAh 7.4V
• 1 Fast desktop charger
• 1
Wall adaptor
• 1 Antenna
• 1 Belt clip
If any item is missing, please verify with your dealer.
Chapter2. Battery Information
2.1 Charging the Battery Pack
The Li-ion battery pack is not charged at the factory; please charge it before use. Charging the battery pack for the first time
after purchase or extended storage (more than 2 months) may not bring the battery pack to its normal maximum operating
capacity. Best operation will require fully charging/ discharging the battery two or three times before the operating capacity
will reach its best performance. The battery pack life may be depleted when it’s operating time decreases even though it
has been fully and correctly charged. If this is the case, replace the battery pack.
