(24) Busy Channel Lock (BCL) - MENU No. 23
When this function is on, it may prevent other radios’ interference. If the selected channel is being used by other
radios, when you press key PTT, your radio cannot transmit.
Release the PTT and transmit as soon as the frequency is no longer busy.
(25) Auto Keypad Lock (AUTOLK) - MENU No.24
When this feature is activated, the keypad will be automatically locked after 15s; this prevents accidental pressure
of any keys.
(26) Frequency offset direction (SFT-D) - MENU No.25
Using this function, you can set the direction of the frequency offset in rx and tx.
You have the following options:
+: Positive offset;
-: Negative offset;
OFF: no offset
Note: you should set different frequency deviation according to the repeaters selected. This function is not
enabled in channel mode.
(27) Frequency offset (OFFSET) - MENU No. 26
In this MENU you can set the deviation between tx and rx. The frequency offset of this radio is 0-69.990MHz.
(28) Channel store - (MEM-CH) - MENU No. 27
When the radio is in frequency working mode or standby mode, input the desired frequency or parameters
directly.
To set a CTCSS tone or a DCS code in tx or rx on the stored channel, refer to paragraphs MENU 10-13
Note: You cannot overwrite a stored channel, you have to delete it first. See following paragraph No.28.
(29) Channel Delete (DEL-CH) - MENU No.28
In this menu you can delete a channel of the radio.
(30) Standby backlight (WT-LED) - MENU No.29
In this MENU you can choose the color of the backlight when the radio is in standby mode.
You can choose amongst:
•
OFF
(backlight off)
•
BLUE
•
PURPLE
•
ORANGE
(31) RX backlight (RX-LED) - MENU No. 30
In this MENU you can choose the backlight color when the radio is receiving.
You can choose amongst:
•
OFF
(backlight off)
•
BLUE
•
PURPLE
•
ORANGE
(32) TX backlight (TX-LED) - MENU No.31
You can choose the backlight color when the radio is transmitting.
