Page 16
Section 3
Installation
Completing the Installation
1.
Replace any cards or drives removed earlier.
2.
Replace the cover of your computer, and reconnect the cords/cables.
3.
Check that your computer starts correctly. It should begin memory count and run its
POST (Power-On-Self-Test). If it does not boot-up, refer to the Technical Guide on page
17 for help.
Final Speed Check Using SysChck
SysChck is a utility located on the Utilities Disk that measures different components in your
computer. Use this utility to measure the CPU Speed and CPU Throughput Speed. You can
measure the performance of your computer by checking SysChck. This is a running test that
should instantly report a reading. There is no need to wait for it to stop. SysChck must be run
in DOS. It cannot be run in the DOS shell through Windows®.
Accessing PNYBENCH:
1.
Insert the PNY Technologies Utility Diskette in the floppy drive
(A:)
Congratulations!
You have just increased the speed of your computer! If you experience any prob-
lems, refer to the Technical Guide on page 17. If your problem is not listed or if you have any ques-
tions regarding this product, call PNY Technologies Technical Support at
1-888-316-1192
.
