EN
3
6. During pressure tests, the valve must be opened.
7. The valve opening button can be pulled up vertically when pressures are equal (inlet and outlet).
8. Reverse polarity and wrong voltage can damage the electromagnetic coil of the gas valve.
9. The valve is recommended to be used with a gas sensor. The connection is plug & play type (plug in the
socket) without any changes.
PRECAUTIONS
1. If bolts and screws come into contact with water or chemicals, it is necessary to remove them to prevent
corrosion;
2. If the product is installed wholly or partly outside, it is recommended to protect it against water;
3. The transparent cover acts as a protection against the accidental action of the red button.
CONNECTIONG THE GAS VALVE AND THE GAS SENSOR
Connecting the gas sensor with the gas valve can be done using the plug & play connector. Both products can
be adapted for other valves / sensors if changing the connections system.
Cable recommendations:
1. Cable type: two-wire, 2 x 0.3 mm² or higher
2. Cable length < 20 meters
