PNI SENSORO SILVER BULLET RX7600, Руководство пользователя

Страница: 11 / 30

10 11
Visor Installation
- Power Cord Operation only
1. Attach visor bracket. Clip the visor bracket to the back pivoting edge of your visor, so that the
plastic piece of the bracket faces downward when the visor is in its normal, stowed position.
2.
Attach the radar detector to the bracket by turning the radar detector upside down and
mounting it onto the plastic end of the visor bracket. You will hear a “click” when the two parts
are properly connected. Make sure the LCD screen faces you.
3.
Power-up. Plug the small end of the straight power cord into the power jack on the side of the
radar detector. Plug the large end of the power cord into the power socket of your vehicle.
4.
Turn on the radar detector by moving the power switch to ON.
5. Reverse the radar detector’s text display. Press and hold the MUTE and ALERT FILTER buttons
simultaneously for 3 seconds to reverse the text display (so messages will be seen right-side-up).
6.
Use the retaining clips to attach any loose wire between the visor and the power socket. Be
careful not to leave any dangling wires that will distract the driver.
INSTALLATION