USER MANUAL
En
gli
sh
3
Introduction
The PNI Mike 80 Bluetooth microphone can communicate wirelessly
with the CB radio (for example: PNI Escort HP 8001L). Thus, you
can get out of your car (up to 10 meters away) and continue the
communication.
Note: In order for your CB radio to be compatible with the PNI
Bluetooth adapter, it must have power on the audio jack.
To allow wireless communication between the microphone and the CB
radio, you must connect to your CB radio the 2-pin (PNI-K) Bluetooth
adapter included in the package. Then, you need to pair the Bluetooth
adapter with the Bluetooth microphone.
You can connect the Bluetooth microphone to both the radio and the
mobile phone at the same time. That way, you can answer the phone
without picking up the phone.
Battery compartment
To open the battery compartment,
turn the clip on the back of the
microphone to the right or left.
Then, using a screwdriver, gently turn
to the right the screw on the top.
Remove the cover.
The microphone includes a 3.7V
1200mAh Li-Ion battery.
Charging the battery
Insert one end of the USB cable
included in the package into the jack
on the bottom of the microphone,
and the other end of the cable into the
USB port of a computer or 230V-5V
USB adapter.
While the battery is charging, the LED
on the microphone is red. When the
battery is fully charged, the LED turns
green.
