PNI GreenHouse SC3500, Руководство пользователя

Страница: 46 / 60

15
LCD Setting
After pressing and holding "ENTER" button for 2 seconds, the unit will enter setting mode. Press
"UP" or "DOWN" button to select setting programs. And then, press "ENTER" or "MENU" button
to confirm the selection and exit.
Program Description Selectable option
00 Exit setting mode Escape
01
Output source priority
selection Solar energy provides power to the loads as first
priority.
If battery voltage has been higher than the setting
point in program 21 for 5 minutes, the inverter will turn
to battery mode, solar and battery will provide power
to the load at the same time.
When the battery voltage drops to the setting point in
program 20, the inverter will turn to bypass mode,
utility provides power to the load only, and the solar
will charge the battery at the same time.
Solar energy provides power to the loads as first
priority.
If battery voltage has been higher than the setting
point in program 21 for 5 minutes, and the solar
energy has been available for 5 minutes too, the
inverter will turn to battery mode, solar and battery will
provide power to the load at the same time.
When the battery voltage drops to the setting point in
program 20, the inverter will turn to bypass mode,
utility provides power to the load only, and the solar
will charge the battery at the same time.
(default)
Utility will provide power to the loads as first priority.
Solar and battery energy will provide power to the
loads only when utility power is not available.
02
AC input voltage range Appliances
(default)
If selected, acceptable AC input voltage range will be
within 90-280VAC.
UPS
If selected, acceptable AC input voltage range will be
within 170-280VAC.
GEN
When the user uses the device to connect the
generator, select the generator mode.
03 Output voltage
Set the output voltage amplitude.(220VAC-240VAC)
50Hz(default) 60Hz