PNI GreenHouse SC1800B, Руководство пользователя

Страница: 10 / 76

User manual 10
En
gli
sh
WARNING! There are two terminals marked “IN” and “OUT”. Please do not
connect the input and output connectors incorrectly.
WARNING! all connections must be made by qualified personnel only.
WARNING! For system safety and efficient operation, it is very important to
use the recommended type and size of cable.
Recommended cable sizes
Gauge Torque value
12AWG 1.2~ 1.6Nm
Follow the steps below to make the AC input/output connections:
1. Before making the AC input/output connection, make sure you have opened
the DC protection or disconnection device.
2. Remove the 10mm insulation from the 6 conductors and shorten the Phase
(L) and the neutral conductor (N) by 3mm.
3. Insert the AC input wires respecting the polarity indicated on the terminals,
then tighten the screws of the terminals. Make sure you have connected the
PE protective conductor first ( ).
- Ground (yellow-green)
L-LINE (brown or black)
N-Neutral (blue)