PNI Fish Seeker US600, Руководство пользователя

Страница: 8 / 88

User manual 8
En
gli
sh
will sound an alarm to warn you that the water depth is too small..
Low battery alarm . When the battery voltage is lower than the set value,
the device will sound an alarm to warn you that the battery needs to be
replaced..
Energy saving mode
If no operation is performed for 3 minutes or no fish is detected, the
device enters the power saving mode. The screen closes. The device
automatically exits economy mode when a key is pressed.
Fish identification mode
1. Normal mode: this mode is suitable for fish ponds, fish ponds and other
similar environments.
2. Shallow water mode: this mode is suitable for waters with a depth
between 0.7 meters and 4 meters.
3. Deep water mode: this mode is suitable for waters with a depth
exceeding 4 meters.
4. Slope land mode: this mode is suitable for fishing in mountain waters.
Frequency of data update
The more frequently the data is updated, the more accurate the data
displayed on the screen. A large amount of transmitted data may slow
down the response speed of the device.
Setting parameters
1. Sonar sensitivity . The higher the sensitivity, the more feedback signals
and screen information you will get. However, if the water is shallow,
excessive sensitivity may cause too many beeps to reflect erroneous data
on the screen. Also, if the water is deep, too little sensitivity can lead to
difficulty acquiring underwater information.
We recommend setting a low sensitivity for shallow water and a high