PNI 461A, Инструкция и руководство по безопасности

Страница: 9 / 20

9
SPECIFICATIONS
Operating Pressure 70-120 psi (4.8-6.9 bar 5-8.4 kgf/cm2)
Actuation Trigger operated - Sequential
Dimensions
Length x Height x Width 10-1/8" x 9-5/8" x 2-5/16"
(257mm x 244mm x 59mm)
Weight 3.2 lbs (1.4 kg)
Staple Capacity 100 Staples
Air Consumption
.026 ft3/cycle @ 80 psi
(.74 ltr/cycle @ 5.5 bar)
(.74 ltr/cycle @ 5.6 kgf/cm2)
Air Inlet 1/4" NPT Thread
STAPLE SELECTION
WARNING
•
Be sure to use only the genuine PNI staples for the
461A. The use of any other staples can result in
tool malfunction and/or staple breakdown, leading
to serious injuries.
ACCESSORIES
WARNING
•
Accessories other than those shown below can
lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
2. Safety Glasses 3. Wrench Set
NOTE: Accessories are subject to change without
any obligation on the part of PNI.
1. Carry Case
APPLICATIONS
•
TONGUE AND GROOVE FLOORING
•
MOISTURE BARRIER
•
SUBFLOOR
The 461A Pneumatic Flooring Stapler, with the standard
shoe, drives 1", 1-1/2 to 1-9/16” Staples into the tongue
and groove flooring at a 45 degree angle. The orientation
of the Staple is as depicted above.
BEFORE OPERATION
Read over section titled "SAFETY" (pages 4 - 7)
Make sure of the following before operation.
Only Staples shown in the table below can be driven with
this Stapler.
.225" (5.71mm)
18 GAUGE 1/4” CROWN
STAPLE
MIN. MAX
1"
(
25m
m
)
.05” (1.27mm)
1-
9/
16”
"
(
39
m
m
)
WORKING ENVIRONMENT
WARNING
•
No flammable gas, liquid or other flammable objects
at worksite.
•
Clear the area of children or unauthorized
STAPLE APPLICATION T&G FLOORING
THICKNESS
1" STAPLE
1 1/2” - 1 9/16”
Staple Angle fastener onto
5/8" - 3/4"
underlayment over
joist construction. 1/4", 5/16", 3/8", 7/16",
1/2”, 9/16”, 5/8
STAPLE APPLICATION CHART
1", 1-1/2” to
1-9/16” Staple
Moisture
Barrier
Subfloor
Tongue and Groove
Flooring
1. Carrying Case