28
To change the call tone number (5 different tones) or to
switch off the call tone, press UP or DN. During this
process, the different call tones can be heard.
If the call number is set to CR OF (call ring off), pressing
the call key will send the preset call No. 1 to another ra-
dio but your PMR will not bleep.
Bleep tone ON/OFF
This feature allows the radio to sound a confirmation
bleep tone whenever a button is pressed.
To switch the bleep tone on or off, proceed as follows:
1. Press the MENU button three times until the »LO
on
«
symbol flashes in the LC display.
2. Press the UP or DN button to enable (»ON« appears
in the display) or disable (»OF« appears in the
display) the bleep tone feature.
3. To exit the selection mode, press the TALK button
once.
End of communication signal (roger) ON/OFF
The roger signal will be automatically transmitted as
soon as the TALK button is released. This lets the other
person know that you have finished transmitting your
message.
To enable or disable the roger signal:
1. Press the MENU button four times until the »ro
on
«
symbol appears flashing in the LC display.
2. Press the UP or DN button to enable (»ON« appears
in the LC display) or disable (»OF« appears in the dis-
play) the roger signal.
3. To exit the roger signal feature, press the TALK button.
Operation
Three times
Four times
054305 Walkie-Talkie 07.06.2005 9:35 Uhr Seite 28
