PMFoundations Clock Divider, Инструкция по сборке, Страница: 6 / 12

Page 6 of 12
5. 6 pin jumper (JP1)
See above for options.
For standard operation: Put wire links from A2-A3 and from B2-B3.
6. Ceramic/film/polypropylene capacitors
Install the ceramic/film capacitors on the TOP of the board. Solder and clip the leads.
7. Transistors
Install the transistors on the TOP of the board. These are polarized components. Align the
outline with the outline on the board. They should be raised off the board surface slightly and
at the same height. Solder and clip the leads.