Rev 1.2, 4/2/19
4
EL-51A-4
SAFETY AND HANDLING
The TSU has been designed and built for the application of polyurea chemical systems, polyurethane
foam chemical systems, and some two-component epoxy systems.
Always use liquids and solvents that are compatible with the unit. If in doubt, consult your PMC
Distributor.
When working with the TSU, it is recommended that the operator wear suitable clothing and elements
of personal protection, including, without limitation, gloves, protective goggles, safety footwear, and
face masks. Use breathing equipment when working with the TSU in enclosed spaces or in areas with
insufficient ventilation. The introduction and follow-up of safety measures must not be limited to those
described in this manual. Before using the TSU, a comprehensive analysis must be made of the risks
derived from the products to be dispensed, the type of application, and the working environment.
To prevent possible injury caused by incorrect handling of the raw
materials and solvents used in the process, carefully read the Safety Data
Sheet (SDS) provided by your supplier.
Deal with the waste caused according to current regulations.
To avoid damage caused by the impact of pressurized fluids, do not open
any connection or perform maintenance work on components subject to
pressure until the pressure has been completely eliminated.
Use suitable protection when operating, maintaining or being present in
the area where the equipment is functioning. This includes, but is not
limited to, the use of protective goggles, gloves, shoes and safety clothing
and breathing equipment.
The equipment includes components that reach high temperatures and
can cause burns. Hot parts of the equipment must not be handled or
touched until they have cooled completely.
To prevent serious injury through crushing or amputation, do not work
with the equipment without the safety guards installed on the moving
parts. Make sure that all the safety guards are correctly reinstalled at the
end of the repair or maintenance work of the equipment.