PMC cor, Руководство пользователя

Страница: 14 / 20

The extruded aluminium remote control replicates all of
the front-panel functions of the
cor
integrated amplifier.
Thanks to the
cor
motorised controls, adjustments made
via the remote from the comfort of your favoured listening
position are replicated on the front panel of the amp.
Do not move the front-panel controls at the same time as
they are being reset via the remote control; this may put
strain on the motorised controls.
The remote control’s batteries can be changed by
removing the rear cover. This requires the use of the
included Allen key to unscrew the two small countersunk
bolts. The remote runs from three AAA batteries. The bolts
should be retightened with the Allen key following battery
replacement.
The performance of the remote control may be impaired if
the IR sensor on the amplifier or the transmitter on the remote
control is exposed to direct sunlight, or strong artificial light
from a fluorescent or infra-red light. The maximum effective
range (with a direct line of sight) is five metres, with a 30°
viewing angle.
If the
cor controls do not respond, even when using the
remote control close to the amplifier’s IR sensor, the
batteries should be replaced.
Insert the batteries in the proper direction, following the +
and - marks indicated.
Remove the batteries from the remote control during
prolonged periods of non-use.
REMOTELY INTERESTING
•
•
•