0000113485/011020/B KUA-200
2
PREFACE
Using this manual
This manual is intended to be used as a work of reference for
professional, well trained and authorised users to be able to
safely install, use, maintain and repair the product mentioned
on the cover of this document.
Pictograms and symbols
The following pictograms and symbols are used in this manual:
TIP
Suggestions and recommendations to simplify
carrying out tasks and actions.
ATTENTION
A remark with additional information for the user. A
remark brings possible problems to the user’s
attention.
CAUTION!
Procedures, if not carried out with the necessary
caution, could damage the product, the workshop or
the environment.
WARNING!
Procedures which, if not carried out with the
necessary caution, may damage the product or
cause serious personal injury.
WARNING!
Fire hazard! Important warning to prevent fire.
WARNING!
Explosion hazard! Important warning to prevent
explosions.
Personal protective equipment (PPE)
Instruction to use respiratory protection when you
do service, maintenance and repair jobs, as well as
during functional testing. We recommend to use a
half-face respirator according to EN 149:2001 +
A1:2009, classe FFP3 (Directive 89/686/EEC).
Personal protective equipment (PPE)
Instruction to use protective gloves when you do
service, maintenance and repair jobs.
Text indicators
Listings indicated by “-” (hyphen) concern enumerations.
Listings indicated by “•” (bullet point) describe steps to
perform.
1
INTRODUCTION
1.1
Identification of the product
The identification plate contains, among other things, the
following data:
- product name
- serial number
1.2
General description
The KUA-200 is an extraction arm with an external middle
hinge. The removable hood has a safety mesh. The arm is
fitted with a sealed shut-off & control valve and is 360°
rotatable. The hood is 85° movable in four directions.
The KUA-200 arm is available in three different types:
- type
H
: for hanging mounting (wall bracket included)
- type
S
: for standing mounting
1
1. Future development
- type
ATEX
: approved for use in explosive environments
Zone 22; marking EX II 3D (for hanging mounting only)
2
1.3
Options and accessories
Arm-fan adapter
for connection of the KUA-200 with a fan
3
1.4
Product combinations
You can use the KUA-200 with the following products:
Extraction fan
- FUA-1800 | 0,55 kW (0.75 HP)
- FUA-2100 | 0,75 kW (1 HP)
- FUA-3000 | 1,1 kW (1.5 HP)
Extension crane
- FlexMax-15/200 | 1,5 m (5 ft)
- FlexMax-25/200 | 2,5 m (8.2 ft)
- FlexMax-35/200 | 3,5 m (11.5 ft)
- FlexMax-45/200 | 4,5 m (15 ft)
Stanchion
- PA-110/200 | 1,1 m (3.6 ft)
- PA-220/200 | 2,2 m (7.2 ft)
1.5
Technical specifications
Physical dimensions and properties
Length:
- KUA-200/3
- KUA-200/4
- 3 m (9.8 ft)
- 4 m (13.1 ft)
Diameter:
- tubes
- hood opening
- Ø 200 mm (7.9 in.)
- Ø 340 mm (13.4 in.)
Material of tubes
aluminium
Material of hoses:
- type
H
and
S
- type
ATEX
- PVC with spring steel wire
- polyethylene with copper
coated spring steel wire
Weight:
- KUA-200/3
- KUA-200/4
- wall bracket (
H
types)
- 34 kg (75 lbs.)
- 36 kg (79 lbs.)
- 5 kg (11 lbs.)
Performance
Recommended airflow
max. 1600 m³/h (940 CFM)
1.6
Working reach
1.7
Pressure drop
Refer to the available product data sheet for
detailed product specifications.
1.8
Ambient and proces conditions
Process temperature:
- min.
- nom.
- max.
-
5°C (41°F)
-
20°C (68°F)
-
70°C (158°F)
Max. relative humidity
90%
Outdoor use allowed
no
2.
In accordance with TRGS 727 & ATEX Directive 2014/34/EU
3. Suitable types: FUA-1800 | FUA-2100 | FUA-3000
