0507210010/010320/D FAN-28
6
WARNING
When you carry out the activities below:
-
first de-energize the fan
- obey the safety regulations that are written in
Symptom
Problem
Possible
cause
Solution
The motor
does not start
The fan does
not function
No mains
voltage
Connect the mains
voltage
The mains cord
is defective
Repair or replace
the mains cord
Loose contacts
Repair the contacts
Motor
protection
switch (MPS)
defective
Replace the motor
protection switch
Control box
(CB) defective
Repair or replace
the CB
Motor defective Repair or replace
the motor
The fan
makes a
humming
sound, but
does not run
Extraction
capacity
insufficient or
no extraction
at all
Motor uses 2
phases instead
of 3 (3ph motor
only)
Repair the phase
connection
Motor capacitor
defective or not
connected (1ph
motor only)
Connect or replace
the motor capacitor
Motor stops
automatically
The fan does
not function
Motor
protection
switch (MPS) is
activated
Let the motor cool
down for some time
Inverted
direction of
rotation of the
motor (3ph
motor only)
Change the
direction of rotation
Motor defective Repair or replace
the motor
Poor
extraction
capacity
The fan does
not function
properly
Inverted
direction of
rotation of the
motor (3ph
motor only)
Change the
direction of rotation
Motor defective Repair or replace
the motor
The fan is
polluted
Clean the fan
blades
Extraction of
false air
Damaged or
worn sealing
material
Replace the sealing
material
Vibrations in
the fan
Fan is not
steady
Imbalance in
the fan
Clean the fan
blades
8
SPARE PARTS
The following spare parts are available for the fan;
- refer to exploded view Fig. III on page 7
9
DISPOSAL
After the life of the product, dispose it of in
accordance with federal, state or local regulations.
CE DECLARATION
CE declaration of conformity for machinery
We, Plymovent Manufacturing B.V., Koraalstraat 9,
1812 RK Alkmaar, Netherlands, herewith declare, on
our own responsibility, that the product:
- FAN-28
which this declaration refers to, is in accordance with the
conditions of the following Directives:
- Machine Directive 2006/42 EC
- EMC 2014/30 EU
- LVD 2014/35 EU
- ErP Directive 2009/125 EC
Signature:
Name:
M.S.J. Ligthart
Position:
Product Manager
Date of issue: 1st April 2020
An
installation
is defined as a combination of several finished products
or components that are assembled by an installer at a given place. The
various parts of the installation are intended to operate together in a
particular environment and to perform a specific task. The entire
installation must comply with the relevant directives and standards. The
assembly instructions given by the manufacturer, as well as the whole
method of installation, must be in accordance with good engineering
practices within the context of installations, as well as installation rules.
Considering the above, the installer will be responsible for completing
the installation and issuing the final CE Declaration of Conformity.
