Kiwi 2+ will not connect
(BT continues to blink after app is launched)
A.
Make sure your vehicle is turned on.
B.
Verify that your Bluetooth is turned on (On most devices go to Settings > Bluetooth)
C.
Verify that the app version you have is current
App
Version
DashCommand
4.6.12
OBD Car Doctor
5.0.0
OBD Auto Doctor
2.6.2
Harry's LapTimer
19.0.29
Torque
1.8.80
D.
Relaunch
a. Restart you smart device
b. Disconnect and reconnect Kiwi 2+ ensuring that the device is firmly
connected to your car’s OBDII port (PWR should be solid and BT should
be blinking)
c. Relaunch the app on your smart device
Kiwi 2+ connected, but does not receive data from OBDII port
(PWR and BT are solid but OBD
and APP are idle)
A.
Verify that your vehicle is turned on
B.
Follow the troubleshooting steps for ‘Kiwi 2+ will not connect’ (above)
