4. Configuring specific apps
Torque Lite /
Torque Pro
1. Go to the Torque home screen (says TORQUE across the top)
2. Click the gear icon in the bottom left corner of the screen
3. Select
Settings
>
OBD2 Adapter Settings
>
Connection Type
4.
Make sure that
Bluetooth
is selected
5.
Select
Choose Bluetooth Device
6. Select your Kiwi (PLXDevices–XXXX)
Torque should automatically connect and reconnect in the future.
OBD Auto
Doctor
1. From the OBD Auto Doctor home screen select your phones
menu button (usually
or ) and select
Settings
2. Verify that the selected Connection Method is
Bluetooth
3. Under Bluetooth device select Search/Change
4. Select your Kiwi (PLXDevices–XXXX)
5. Select your phones back button
6. Select
CONNECT
OBD Auto Doctor should now connect with your Kiwi 2+ and ECU.
Harry's
LapTimer
Rookie /
Petrolhead /
Grand Prix
1. From LapTimer’s home screen select Admin > Sensor list
(You can also select the menu button in button in the top right
corner of any screen and select Switch view … > Settings)
2. Select the Add Bluetooth (
) button
3. Select your Kiwi (PLXDevices–XXXX)
(If Harry’s does not automatically connect, click on the sensors
name leave the field blank and select
Set
and
OK
)
4. Select
OBD
Harry's should automatically connect and reconnect in the future.
OBD Car
Doctor
1. Select the menu button at the top right corner of the screen and
select
Configuration
>
Connection
>
Connection mode
2. Make sure that
Bluetooth
(not Kiwi 3) is selected
3. Select
BT connection
4. Select your Kiwi (PLXDevices–XXXX)
5. Tap your phone’s back button twice to return to the main menu
6. Select
connect
DashCommand 1. Select
Connect
(DashCmd can take up to 30 seconds to connect.)
2. If DashCommand fails to connect select
Settings
>
OBD-II Input Type
and ensure that ELM is selected
