46
6. Close the ADF cover by pushing it back down until it snaps back into place.
C
ALIBRATING THE
S
CANNER
Calibrate the scanner if colors appear in areas that should be white, or colors of the
scanned image and the original vary a lot. This allows you to adjust and compensate
for variations that can occur in the optical component over time by its nature.
Information
Make sure to slide the
Sheetfed / ADF scan
switch
downward for ADF scanning calibration.
The following describes how to calibrate the scanner:
1. The Calibration Sheet, marked with an arrow on either edge at both sides, is
used specially for
ADF Scanning
calibration.