Page 35/68
4.1.5.2 Transferring data in GDT format (only plusoptiX A12C)
Touch GDT button (1) to choose GDT file format.
Screenshot 19: GDT settings for EMR integration
Text files are saved in a so-called transfer directory (URL:\\plusoptix12\transfer\) for data
exchange. The names of these text files are comprised of sender and recipient identifiers.
These identifiers (4 characters each) can be set by touching buttons (2) and (3). The file
names used are displayed alongside these identifiers (4).
The file "plusremo.gdt" contains patient data from the EMR system, and the file
"remoplus.001" contains measurement results from the first measurement of this patient. If the
same patient is measured repeatedly, the file extension is incremented by one each time for
each subsequent measurement ("remoplus001", "remoplus002" "remoplus003" etc.)
The measurement results that are saved in file "remoplus.001" can be formatted in different
ways. Touch button (5) to use an extended GDT format. Using buttons (6) and (7), you can
choose between the strict GDT formats with the results in 6220 (6) or 84xx tuple (7).
Using button (8) you can also save a measurement report (see chapter 4.1.9 "Save and print a
measurement report") to the transfer directory. The file name for the measurement report is:
"remoplus.001.pdf". Where additional measurements are performed for the same patient, a
new measurement report is saved, too ("remoplus.002.pdf", "remoplus.003.pdf" etc.). Note
that in order to save a measurement report a SD-card has to be connected to the device.
To save your settings, touch Checkmark button in navigation bar (9).
1)
2)
3)
4)
5)
6)
7)
8)
9)
