Plus C-12 Series, Руководство по сборке и настройке

Страница: 11 / 20

11
(3) Securely tighten the screws that were fastened temporarily.
This completes the assembly of the printer table.
* Appearance of printer is for illustration purposes.
(4) Secure the printer with the printer guides.
Mount the printer guides to prevent the printer from falling
when the main unit is moved.
Two sets of printer guides and two sets of Velcro are included
with the main unit.
Check the size of the printer and whether or not the feeding
tray can be set and determine the position in which the printer
is to be set accordingly.
When securing the printer using just one set of printer guides,
move it to the left or right side.
3
2
1
3
Velcro
Velcro
Printer guide
Printer guide
M3×6 screws
Peel off the backing paper from the Velcro and attach the Velcro
to the bottom of the printer.
Do not attach the Velcro to a sunken surface of the printer, or
it will not stick to the Velcro on the printer table.
Peel off the backing paper from the Velcro and attach the Velcro
to the printer table. Attach the Velcro in a position matching the
position of the Velcro attached to the printer.
Place the printer on the printer table, then fasten the printer
guide using two M3x6 screws. Press the printer guide against
the printer when tightening the screws.
*1. When the printer and the printer table are the same size,
installation of the printer guides is not necessary.
*2. When installing using a stand, the position in which the
printer is secured differs for the standard type (center) and
wide type (towards the right).
6. ASSEMBLY OF THE PRINTER TABLE