Plum PlumPlay 22300AD82, Руководство по сборке

Страница: 4 / 16

4
Children must not use the equipment until properly installed.
Maximum fall height: 55cm/21.65in
Surface selection instructions
Loose-Fill Materials should be placed under the dome and 6ft out in all directions.
Use a minimum of 6in of protective surfacing for play equipment less than 4ft in height. If
maintained properly, this should be adequate.
Use containment, such as digging out around the perimeter and/or lining the perimeter
with landscape edging. Don ‘t forget to account for water drainage.
Check and maintain the depth of the loose-fill surfacing material. To maintain the
right amount of loose-fill materials, mark the correct level on play equipment support
posts. That way you can easily see when to replenish and/or redistribute the surfacing.
Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.
Operating instructions
We recommend that only one user whose weight is less than 50kg/110lb use this see-
saw.
The owners shall not instruct children to use the equipment in a manner other than
intended.
The owner shall instruct children not to walk close to, in front of, behind, or between
moving items.
The owner shall instruct children not to get off equipment while it is in motion.
The owners shall not allow children to wear inappropriate items, such as but not limited
to, loose fitting clothing, hood and neck drawstrings, scarves, cord-connected items,
capes and ponchos. These items can cause death by strangulation.
The owners shall not instruct children to climb when the equipment is wet.
The owners shall not instruct children to attach items to the playground equipment that
are not specifically designed for use with the equipment, such as, but not limited to,
jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation
hazard.
The owners shall instruct children to remove their bike or other sports helmet before
playing on the playground equipment.
The owners shall dress children with wellfitting and full foot enclosing footwear.Examples
of the inappropriate footwear are clogs, flip flops and sandals.
Maintenance instructions
At the beginning of each play season:
Tighten all hardware
Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are
loose, cracked or missing.
Check metal parts for rust. If found, sand and repaint using a nonlead-based paint
meeting of the requirements of 16CFR 1303.
Reinstall and check any plastic parts that were removed for the cold season.
Rake and check depth of loose fill protective surfacing materials to prevent compaction
and to maintain appropriate depth. Replace as necessary.
Twice a month during play season:
Tighten all hardware
Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are
loose, cracked or missing.
Rake and check depth of loose fill protective surfacing materials to prevent compaction
and to maintain appropriate depth. Replace as necessary.
At the end of each play season:
Remove plastic parts as specified by the manufacture and take indoors or do not use.
Rake and check depth of loose fill protective surfacing materials to prevent compaction
and to maintain appropriate depth. Replace as necessary.
Owners shall be responsible for the maintaining the legibility of the warning labels.
Disposal instructions
To dispose of the item, first disassemble it. Dispose of it in such a way that no
unreasonable hazards will exist at the time that the item is discarded.
EN ASTM Safety instructions/EN ASTM Instructions de sécurité
WARNING
！