33
13.
STRUCTURE – SERVICE MENU
Service settings
Burner settings
Boiler settings
CH and HUW settings
Buffer settings*
Mixer 1 settings *
Mixer 2 settings *
Mixwer 3 settings *
Mixer 4 settings *
Mixer 5 settings *
Service counters
Restore service settings
Burner settings
Firing-up
Ignition test time
Feeding time
Flame detection
Firing-up airflow
Firing-up time
Blow-in intensity after
inflame
Blow-in period after inflame
Igniter period
Worktime with min. power
Operation stetup
Cycle time OPERATION
Blow-in for Min. output kW
Feeder efficiency
Energy density
Tank capacity
Burning off
Burning off max. time
Burning off min. time
Air flush intensity
Air flush periody
Air flush interval
Air flush start
Air flush stop
Cleaning
Poker p.before inflame
Poker p.after bur.offe
Cleaning airflow
Supervision
Supervision time
Feed time
Cycle time
Blow-in output
Min. airflow output
Fuel detection time
Max. burner temperature
Additional feeder operation time
Boiler settings
Thermostat selection
Return protection*
Min.boiler temperature
Max. Boiler temperature
Reserve boiler
Alarms
Boiler cooling temperature
Pump off by thermostat
CH and HUW settings
CH activation temp..
CH stand.load.HUW*
Min HUW. temp.*
Max HUW. Temp.*
Boiler inc.by HUW and Mixer
HUW oper.extension
Circulation standstill time*
Circulation operation timei*
Exchanger*
Buffer settings
Activate operation
Loading start temperature
Loading end temperature
Mixer settings 1,2,3,4,5
Mixer support
Off
CH on
Floor on
Pump only
Thermostat selection*
Min mixer. temperature
Max Mixer. temperature
Valve opening time
Pump off by therm.
Mixer input dead zone*
*Not available if proper sensor not attached,
extension module or parameter is hidden.
