PLUM AUDIO –
ARBA
EXAMPLE 6 – VOLTAGE CONTROLLED DISTORTION:
For this example, we will assume that the limiters are left active (default settings).
Insert the audio signal to the input of channel 1 and the envelope generator to the CV input of
channel 1.
Use the output of channel 4 and connect it to your listening path.
Use the CV input of channel 2 to control the amount of distortion. When the CV signal on this
input is 0V the output is clean. Any CV above 0V will increase the distortion.
EXAMPLE 7 – VOLTAGE CONTROLLED SOFT CLIPPER:
As in the previous example, you can use half of
ARBA
to control the amount of soft clipping of
one signal by using the output of channel 2 and the second half of
ARBA
is left free for different
use.
