PLUM AUDIO –
ARBA
EXAMPLE 4 - SHARED INPUT:
ARBA
can share one input to a few channels.
When you leave an input unconnected, the signal is shared from the previous connected input.
This is great to sequence different processing for one audio source like several effect units or
different filters.
In this example, only the input of channel 1 is connected. This input is shared with the inputs of
channels 2, 3, and 4.
You can connect outputs 1-4 to different paths and use different CV generators to create cool
rhythm sequences.
BOOSTING:
When using the normalization of
the input and output together
(chaining channels) you will get a boost
of about 6dB* in each channel after the channel from which the signal enters.
*Depending on the settings of the trimmers on the back of the module. It can be up to 9dB per channel
when setting the trimmers fully clockwise.
