1 Important Safety Information
Important Safety Information
The following safety symbols indicates the safety hazard conditions, this needs to be taken care to
reduce the risk of electrical shock and to ensure the safe installation and operation of the Plugreen
Solar micro-inverter.
: This indicates a situation where failure to follow instructions may cause a serious
hardware failure if not applied appropriately. Use extreme caution when performing this task.
: This indicates information particularly important for optimal system operation. Follow these
instructions closely.
Read this very carefully
WARNING
NOTE
Safety Instructions
Perform all electrical installations in accordance with all local electrical codes and the National
Electrical Code (IEC).
Be aware that only qualified personnel should install and/or replace Plugreen Solar micro-inverters.
Do not attempt to repair the Plugreen Solar micro-inverter; it contains no user-serviceable parts. If it
fails, please contact Plugreen customer service to obtain an RMA number and start the replacement
process. Tampering with or opening the Plugreen Solar micro-inverter will void the warranty.
Before installing or using the Plugreen Solar micro-inverter, please read all instructions and cautionary
markings in the technical description and on the Plugreen Solar micro-inverter system and the PV-
array.
Connect the Plugreen Solar micro-inverter to the electrical utility grid only after receiving prior approval
from the utility company.
Be aware that the body of the Plugreen Solar micro-inverter is the heat sink and can reach a
temperature of 80 C. To reduce risk of burns, do not touch.
Do NOT disconnect the PV module from the Plugreen Solar micro-inverter without first removing AC
power.
§
§
§
§
§
§
§
NOTE:
For Plugreen Solar micro-inverter Warranty Terms and Conditions, see the Appendix of this
manual.
Copyright Plugreen Corporation. 2011 1-00001 REV 1
1
>
