4
II VOC and humidity sensor for Avent P190/P310/P460
11. Start laptop.
12. Plug the USB cable with port type A in the laptop and
port type B in USB interface (10).
13. Start Pluggit iFlow.
14. Open installer section using the password.
The password is available after successful registration.
15. If the room ventilation unit is not automatically detected,
enter serial number and save it, see operating and in-
stallation instructions of the room ventilation unit.
16. Follow the instructions of the Pluggit iFlow activate VOC
and humidity sensor.
IAQ-2000 Technical data
•
VCC = 5V +/-0,25V
•
Maximum 20mV ripple admissible
•
Current consumption: 30-45mA
•
Dimensions: 22 x 8mm
•
Weight: 10g
•
Temperature range: 0-50°C
•
Air humidity range: 5-95% relative humidity non-con-
densing
Exhaust air humidity sensor
•
VCC = 5V +/-0,25V
•
Current consumption: 30-45mA
•
Dimensions: 20 x 10mm
•
Weight: 12g
•
Temperature range: 0-50°C
5.1. DECOMMISSIONING IN CASE OF DISMANTLING
Decommissioning must only be carried out by qualified per-
sonnel.
•
Disconnect the unit from power supply.
•
Disconnect all poles of the unit from the power supply
system.
5.2. PACKAGING
The transport and protective packaging are usually manu-
factured from reusable materials.
All packaging material must be disposed of according to
local laws and regulations.
5.3. OLD APPLIANCE
The sensors contain valuable materials and substances
which should be kept separate from residual waste.
The old appliance can be delivered to the local recycling
company for recycling.
Note:
The Pluggit iFlow can be downloaded free of charge at
www.pluggit.com and installed on the laptop. For this
purpose, you need to register as user/specialised com-
pany.
10
M+P-26A-0922
4. TECHNICAL DATA
5. DECOMMISIONING/DISPOSAL
