PLS HVR 505, Руководство по эксплуатации

Страница: 8 / 80

FUNCTIONS
Press 1 (See keypad chart) The unit is self-level-
ing and power light is lit. Press the key again and the
unit will turn off.
After laser has automatically leveled, the laser beam
stops blinking. The laser will rotate up to 600 r.p.m. If the
gradient exceeds 5º, the manual indicator will blink.
NOTE: If the unit does not level within 5 minutes,
it will shut off.
Rotation Mode
The 5 key adjusts rotation speed. Adjust through
a cycle. To stop rotation, press the 5 key.
Rotation will be clockwise.
When the 9 key is pressed, rotation will be
counterclockwise.
Scanning Mode
Adjust rotation speed until the laser stops rotating.
Press the 6 key and the unit starts scanning
mode. Press the 6 key again to adjust
scanning angle.
Press 8 clockwise or 9 counterclockwise;
key will move scanning laser line.
Setting Slope
The PLS HVR 505 can set slope on dual axes.
Press the 7.
The manual indicator is on.
Setting slope of X direction: Aim X1 of
the instrument in the direction necessary
to set slope. Press 10.
The laser beam moves upwards or downwards.
Setting slope of Y direction.
Aim Y1 of the instrument in the direction
necessary to set slope.
Press 11.
The laser beam moves upwards or downwards.
Automatic Drift System
Press 12. Press the TILT key, the power indicator blinks
slowly. After the instrument has leveled automatically
for about 3 seconds, the ADS function is activated.The
power indicator will blink quickley, and automatic leveling
function shuts off when the instrument is disturbed by
external circumstances. At the same time, the laser
module will stop scanning and start blinking.
6
X1
X2
Y1
Y2
Power switch