plottiX iXpress, Руководство пользователя

Страница: 6 / 12

Troubleshooting Recommended Settings
9 8
plottiX iron-on foil Temperature Time Suited textiles Info
plottiX NylonFlex
115 centigrade Ca. 15 seconds Nylon and other coated
textiles
cold peel
plottiX PremiumFlock 160-170 centigrade Ca. 15-17 seconds cotton
polyester
mixed fabric
plottiX PremiumFlock Neon 175 centigrade Ca. 15 seconds
plottiX MicroFlock 160-170 centigrade 15-17 seconds
plottiX EffektFlex 160-170 centigrade Ca. 10 seconds
plottiX ReFlex 150 centigrade Ca. 15 seconds
plottiX MetalFlex 160-170 centigrade Ca. 15-17 seconds hot or cold peel; weed stret-
chable foil carefully
plottiX PremiumFlex
165 centigrade Ca. 17 seconds hot or cold peel
plottiX PremiumFlex Neon
165 centigrade Ca. 17 seconds
plottiX PremiumFlex Glow in the Dark
165 centigrade Ca. 17 seconds
plottiX PuffyFlex
165 centigrade Ca. 17 seconds
plottiX PremiumFlex Disco
165 centigrade Ca. 17 seconds
plottiX GlitterFlex
155 centigrade Ca. 10 seconds hot peel
Please note that temperature and press time can vary depending on foil manufacturer. Ask your foil manufacturer for recommended Transfer Press
settings, if required settings aren’t indicated. Further note that the Transfer Press has a higher efficiency than a flatiron. Thus temperature and pres -
sing settings for iron are lower than manufacturer’s specifications.
Q: If the temperature hasn’t reached the set value yet and I press TIMING but-
ton, the countdown starts. Is there something wrong?
A: You can press TIMING button at any time without waiting for the temperature
to reach the set value. However, please make sure the temperature reaches at
least the minimum recommended setting (see page 8) for your transfer project
to be successful.
Q:
What are the tips for successful transfers with iXpress Transfer Press?
A: Three things are important for perfect transfers that last:
1.
A firm, even surface. Kitchen islands, countertops, or sturdy tables work well.
Ironing boards and plastic tables are not sturdy enough for successful transfers.
We also suggest the use of our silicone mat.
2. Use the recommended settings for the iron-on and base material you‘re using.
3. Make sure you apply firm pressure during transfer.
Q: I followed the instructions, and my iron-on didn’t stick. What happened?
How do I get it to work?
A:
The most common reasons for your images not sticking:
1. The press did not make full contact with the base material. This could be
because of seams, zippers, or anything else that will cause you to not have an
even surface.
2.
Verify that your machine is set to the recommended settings.
3. Make sure that you choose the recommended pressing time. If the settings
are correct press the front and back of material with heat for an additional 10-15
seconds.
Q: The press temperature goes down when I apply it to the image. Is there
something wrong with my machine?
A: The press temperature may fluctuate briefly when placed on the base mate -
rial after heating. This is due to the difference in temperature of the heated plate
and the base material. Don‘t worry, the press temperature will quickly return to
the selected settings.
Q: My device keeps turning off, and I have to turn it back on. Why?
A: This is the auto shut-off safety feature of iXpress Transfer Press. After 10
minutes of inactivity, the device alerts you by flashing blue power button light,
making a beeping sound and then shuts off. You can press any button to exit the
auto shut-off mode.
Q: Do you offer warranty for iXpress Transfer Press?
A:
Yes, we do offer a two year warranty for the Transfer Press. If you have any
questions related to our products, please contact your specialist retailer.
Q: When I press MODE button, the screen display shows „000”. Is there somet -
hing wrong with my press?
A: Three zeroes will be shown on the screen if you are in the mug transfer mode
and your Mug Press attachment is not connected to iXpress Transfer Press. If you
want to use your Mug Press, please make sure it is properly connected to iXpress
Transfer Press. Otherwise, press MODE button again to switch to the default iron
mode. Once you do that, zeroes will disappear from the screen.