Plockmatic CF5030, Руководство по обслуживанию

Страница: 34 / 52

25 November 2011
CF-4-10
FAULT CODE DESCRIPTIONS
Block schematic diagram to CF-010
Disconnect plug F.P6 from ADDON PCB “F”.
1. Measure between J6-10 and J6-12 (5V and GND)
2. Measure between J6-11 and J6-12 (Signal and GND)
The voltage is 5 VDC +/- 10%.
Y N
Replace F.P6 from ADDON PCB “F”.
Disconnect plug from sensor Q32.
1. Check wire for Continuity / Short circuit from the Red wire at plug Q32 to F.P6-10
2. Check wire for Continuity / Short circuit from the White wire at plug Q32 to F.P6-11
3. Check wire for Continuity / Short circuit from the Black wire at plug Q32 to F.P6-12
Is there Continuity and no short circuit between Red and chassis/GND, White and chassis/GND
Y N
Repair Wire Harness.
Replace sensor Q32.
CF-010 CF-Q32 Paper Positioning Sensor Faulty
Fault Code indicates that the Paper Positioning Sensor (Q32) is faulty.
Initial Actions
• Make sure that Q32 is installed and connected correctly.
• Make sure that plug F P6 on Addon PCB “F” in the Booklet Maker is connected.
• Make sure that jack/plug J32/P32 J33/P33 in the Cover Feeder is connected.
Procedure
WARNING
Switch off the Main Power Switch and disconnect the Main Power Cord
before disconnecting, removing or replacing any electrical components.