Plockmatic BT 30, Руководство по эксплуатации

Страница: 8 / 24

4. Operating the STR
This section explains how to use the STR during normal operation.
From either side (top or bottom) 40mm of the finished booklet should be free from staples to ensure
safe operation.
NOTE: The System Setup has to be set once.
4.1 System Setup
Fig. 1 Fig. 2
8
Fig. 3 Fig. 4
Step Action Remarks
1. Open the Top cover of the STR.
2. Turn on the STR with the Power
Switch
Attention: Check if the Trim Waste Bin Drawer is
closed, otherwise the STR indicates ‘Cover
Open’.
3. Close the Top cover of the STR.
4. Enter ‘Admin’ menu Press the ‘Admin’ button (Fig. 1)
5. Enter ‘System Setup’ menu Use the ‘ ▲ / ▼ buttons’ to select ‘System Setup’ and
press the ‘Enter’ button. (Fig. 2)
6. Select System Setup Set System Setup to
STR (3 / 4)
(Fig. 3)
Save and confirm with [Enter]
Attention: After saving the STR will restart
(Fig. 4).