background image

Stapler Folder Model 82 Operator Manual

T10136

Operational safety

This operator manual describes how to operate the Stapler-folder
Model 82 on-line together with collator Models 300/400, Model 100 or
as a stand alone unit.

1.

Introduction

Always

 connect the equipment to a properly

grounded power source receptacle. In doubt,
have the receptacle checked by a qualified
electrician.

WARNING: 

Improper connection of the equip-

ment grounding conductor can result in electri-
cal shock.

Always

 follow all warnings marked on, or sup-

plied with, the equipment.

Always

 locate the equipment on a solid support

surface with adequate strength for the weight of
the machine.

Always

 exercise care in moving or relocating

the equipment.

Always

 keep magnets and all devices with

strong magnetic field away from the machine.

Never

 use a ground adapter plug to connect

the equipment to a power source receptacle
that lacks a ground connection terminal.

Never

 attempt any maintenance function that is

not specifically described in this documentation.

Never 

remove the covers or guards that are

fastened with screws.

Never

 install the unit near a radiator or any

other heat source.

Never 

override or “cheat” electrical or

mechanical interlock devices.

Never

 operate the equipment if you notice

unusual noises or odors. Disconnect the power
cord from the power source receptacle and call
your customer service engineer to correct the
problem.

Attention to the following notes ensures the continued safety operation of your equipment.

1-1

Содержание BM 82






















Отзывы: