Plockmatic BK5030 Скачать руководство пользователя страница 52

Страница: 52 / 64

Where to put Your Machine

Machine environment

Power connection

•

Always

connect the equipment to a properly grounded power source. If in

doubt, have the power source checked by a qualified electrician.

•

WARNING:

Improper grounding of the equipment can result in electrical shock.

•

Never

connect the machine to a power source that lacks a ground connection

terminal.

• Always locate the equipment on a solid support surface with adequate strength for the

weight of the machine.

• Always keep magnets and all devices with strong magnetic fields away from the

machine.

If the place of installation is air-conditioned or heated, do not place the machine where it

will be:

•

Subjected to sudden temperature changes.

•

Directly exposed to cool air from air-conditioner.

•

Directly exposed to heat from heater.

Содержание BK5030

































































Результаты поиска

Содержание BK5030

Отзывы:

Похожие инструкции для BK5030

Бренды по названию

Популярные бренды

Plockmatic BK5030, Руководство по эксплуатации

Результаты поиска

Содержание BK5030

Отзывы:

Похожие инструкции для BK5030

Бренды по названию

Популярные бренды