Plockmatic BK5030 Скачать руководство пользователя страница 47

Страница: 47 / 64

Booklet maker fault codes

Check stapler or Change staple cartridge

These messages will be displayed when a staple cartridge is empty or when stapling could

not be performed. Check in the following order:

– If a staple cartridge is empty, replace according to section 1. Basics.

– If staple cartridges are OK; remove the set and check that the number of sheets is within

specifications.

– If staple cartridges are OK and set is within specifications; remove and check stapler head

according to section 1. Basics.

Set too thick

This message will be displayed when the set sent from the copier is outside Booklet Maker

specifications. Open the top cover, remove the set and close the top cover.

Remove purged sets

This message will be displayed when the purged set is in the infeed area. Open the top cover,

remove the set and close the top cover.

Illegal feed mode

If this message is displayed, contact customer support.

Stacker full

This message will be displayed when the Stacker is full. Empty Stacker.

Double feed

This message will be displayed when the Cover Feeder detects that more than one cover

was fed from the cover bin. If more than one cover was fed, check cover loading according to

section 2. Making Booklets. If the covers that are fed are thick, with dark print or with mixed

prints on the covers, double feeding may be displayed even if that is not the case. Turn off

double sheet detection according to section 3. Tools.

Misfeed

This message will be displayed when the Cover feeder could not feed a cover from the paper

bin. Check cover loading according to section 2. Making Booklets. If problem persists, clean

separator pad according to section 7. REMARKS.

Cover feeder fault codes

Continued on next page.

Содержание BK5030

































































Результаты поиска

Содержание BK5030

Отзывы:

Похожие инструкции для BK5030

Бренды по названию

Популярные бренды

Plockmatic BK5030, Руководство по эксплуатации

Результаты поиска

Содержание BK5030

Отзывы:

Похожие инструкции для BK5030

Бренды по названию

Популярные бренды