PLKB DEPOWER FOIL KITE, Руководство пользователя

Страница: 6 / 20

S T E P 2 . P R E P A R I N G Y O U R K I T E A N D B R I D L E S
Take the kite out of the bag and
unfold the kite. Lay the kite down
with the lower skin up, trailing edge
opposite to the wind direction. Put
some sand or other suitable weight on
the trailing edge of the kite to prevent
it from blowing away. Remove the bridle loops from the
Velcro tag and check that the bridles
are not tangled. -
gether in the Velcro tag in the centre
of the leading edge of the kite.
Place the depower bridle with pulleys
flat on the grond, make sure these
lines are free of tangles and twists.
Place the rear line attachment point
on the outside, the top line attach-
ment points on the inside.
REAR
LINE
TOP
LINE
SAFETY
LINE
TOP
LINE
REAR
LINE
S T A R T I N G O F F
To start flying your kite you need to follow these steps:
Step 1. Finding the right location to launch your kite.
Step 2. Preparing your kite and bridles.
Step 3. Setting up your bar and lines.
Step 4. Checking your safety systems.
Step 5. Launching the kite.
S T E P 1 . F I N D I N G T H E R I G H T L O C A T I O N T O L A U N C H Y O U R K I T
E
Find a spot to setup, away from airports, powerlines, trees and buildings. When
launching, the area should be free of kiteflyers or other people. Also make sure
there are no sharp objects on the ground, to prevent any damage to your kite.
STEP 2. PREPARING YOUR KITE AND BRIDLES
Take the kite out of the bag and
unfold the kite. Lay the kite down
with the lower skin up, trailing edge
opposite to the wind direction. Put
some sand or other suitable weight on
the trailing edge of the kite to prevent
it from blowing away. Remove the bridle loops from the
Velcro tag and check that the bridles
are not tangled. -
gether in the Velcro tag in the centre
of the leading edge of the kite.
Place the depower bridle with pulleys
flat on the grond, make sure these
lines are free of tangles and twists.
Place the rear line attachment point
on the outside, the top line attach-
ment points on the inside.
REAR
LINE
TOP
LINE
SAFETY
LINE
TOP
LINE
REAR
LINE
STARTING OFF
To start flying your kite you need to follow these steps:
Step 1. Finding the right location to launch your kite.
Step 2. Preparing your kite and bridles.
Step 3. Setting up your bar and lines.
Step 4. Checking your safety systems.
Step 5. Launching the kite.
STEP 1. FINDING THE RIGHT LOCATION TO LAUNCH YOUR KITE
Find a spot to setup, away from airports, powerlines, trees and buildings. When
launching, the area should be free of kiteflyers or other people. Also make sure
there are no sharp objects on the ground, to prevent any damage to your kite.