Plinius TOKO, Инструкция по эксплуатации

Страница: 16 / 26

14 PLINIUS TOKO
Installation & Operation
WARNING: RISK OF ELECTRIC SHOCK. TERMINALS MARKED WITH
SHOULD BE CONSIDERED HAZARDOUS LIVE AT ALL TIMES.
This Digital Audio Player operates at hazardous voltage levels. We recommend
that any work requiring removal of the lid be referred to a suitably qualified and
experienced service technician. DO NOT place this Digital Audio Player in any position
where liquids or any foreign material may accidentally enter it.
PLEASE READ & UNDERSTAND THE PRECAUTIONS WITHIN THIS MANUAL
FOR PLACEMENT & OPERATION OF THIS PRODUCT.
CONNECTIONS
Connections to your Plinius Toko should be made in the same order as they are
listed in this section. DO NOT attempt to connect your Plinius Toko until you have
read and fully understood these instructions. Although these instructions refer to the
connection of the Toko to a preamplifier, the Toko can also be safely installed into
multimedia systems by following the same installation guidelines. Should you require
further assistance, please contact your Plinius dealer.
NETWORK INPUT
Connect your Network device (Router, Computer etc) to the Network input on the
back of the Plinius Toko using suitable CAT5 or CAT6 Ethernet cables only. Make sure
the connector is a snug fit and inserted all the way in.
OUTPUT TERMINALS
The connection of the outputs of the Plinius Toko must be made by an ‘instructed
person’ or by suitable ready made interconnect cables only. Connections for
preamplifiers or integrated amplifiers are provided to the left of the rear panel.
Connections are available for analogue single ended RCA, and balanced XLR cables.
If using single-ended RCA outputs, connect your Toko to the RCA inputs on the back
of the preamplifier. Make sure you connect the red coded cable to the red RIGHT
RCA output, and the black (or white) cable to the black LEFT RCA output. Also make
TOKO ETHERNET INPUT NETWORK ROUTER NAS MEDIA SERVER